Consists of:

Availability on request
Flow Range Sensor (l/min) 4.7 - 20 (Accuracy of +/- 1%)
Max. Viscosity (mm²/s) 0.8 - 40 mm²/s
Fitting Size 1/2”
Max. Liquid Temperature 90°C / 194°F
The LEVIFLOW® LFS inline sensor is designed for non-invasive high precision flow measurements of high purity fluids. The wet material is made from PFA and resistant against harshest chemicals. The converter with a digital signal processor (DSP) processes sensor signals. Various signals (analog output, digital input and digital output) are provided and can be configured with a PC software. A two wire RS485 bus allows arrays of multiple flow-meters. In addition, the sensor value is shown on a 4-digit display.


Flow Range Sensor (l/min) 4.7 - 20 (Accuracy of +/- 1%)
Max. Viscosity (mm²/s) 0.8 - 40 mm²/s
Max. Pressure (bar) 5 / 4.1 (at 20° / 90 °C)
Service/Control Interface RS485
Fitting Size 1/2”
Fitting Type Tube
Voltage 24 VDC
Wet Volume (without drain port) 20.8 ml
Wet Surface (without drain port) 87.5 cm²
Connector Type SMB
Cable Lenght (mm) 500
Cable Jacket FEP
PLC Interface 1x Analog Output: 4 – 20mA (0 – 20mA configurable)
1x Digital Input: Volume Counter Reset or Zero Adjust
2x Digital Outputs: Flow Alarm, Measurement Error, Volume Counter Pulse, Volume Counter Alarm, Flow as Frequency or Bubble Detection, Custom Output (default: normally open)
4 Digit display: (flow rate, volume counter, error codes) re-zero button
Address potentiometers for RS485 address setting
max. array of 99 channels
Max. Ambient Temperature (Operating/Storage) 0-50°C
Max. Liquid Temperature 90°C / 194°F
Housing/Material PFA
Connector Cover PVDF cover (male with O-Ring IP-65)
Shape Z
Regulatory Status CE
IP Rating 65
Dimensions (mm) See technical drawing
Weight (kg) See Subcomponents
Show more specifications
Show less specifications

System Configuration

Complementary Products