Microelectronics Pumps (BPS Series) 
Bioprocessing Pumps (Single-Use) 
Microelectronics Fans 
Control Units 
100-91122
Single-Use Pump Head DCP-200.3-G25
Availability on request
Max. Flow (l/min)
21
Max. diff. Pressure (bar)
2
Fitting Size
1/2”
Applied Gamma Dosage
≥ 25 kGy
Max. Liquid Temperature
60°C / 140°F
The impeller and pump casing are both fabricated from biocompatible (FDA, USP-VI, BSE/TSE and Animal free) gamma sterilizable polypropylene (PP) and together they make up the disposable pump head. A simple and intuitive exchange of the single-use pump head is achieved with a bayonet sockt type mounting procedue. Based on the principles of magnetic levitation, the pump’s impeller is suspended, contact free, inside a sealed casing and is driven by the magnetic field of the motor.
Specifications
| Max. Flow (l/min) | 21 |
|---|---|
| Max. Viscosity | 20 cP |
| Max. diff. Pressure (bar) | 2 |
| Fitting Size | 1/2” |
| Fitting Type | Barb |
| Pump Head Material | Polypropylene |
| Impeller Material | Polypropylene |
| Sealing Ring | Infrared welding |
| Sterilization Methods | Gamma radiation up to 40 kGy |
| Applied Gamma Dosage | ≥ 25 kGy |
| Max. Liquid Temperature | 60°C / 140°F |
| Wet Volume (without drain port) | 24 ml |
| Wet Surface (without drain port) | 150 cm² |
| Housing/Material | Polypropylene |
