Loading...
100-91215

Pump System BPS-i30.15 (EasyConnect, High Pressure)

Consists of:

Availability on request
Max. Flow (l/min) 3.8
Max. diff. Pressure (bar) 2.8
Max. Viscosity 10 cP
Max. Liquid Temperature 70°C / 158°F
Service/Control Interface 2x Fieldbus RS485 with Modbus protocol and PLC Interface
This system requires complementary products! Please check section ‘complementary products’ below.

The Levitronix® Bearingless Pump System is designed for ultrapure processing of delicate fluids in microelectronic wet applications. Based on active magnetic levitation, the pump impeller is suspended and driven by the motor’s magnetic field. The wide gap ensures there is no mechanical contact between moving parts and, therefore, no wear. There are no bearings to wear out or seals to break down. The impeller and casing are both made from chemical-resistant high purity fluoropolymer resins. Fluid flow rate and pressure are precisely controlled by electronically regulating the impeller speed.

Specifications

Max. Flow (l/min) 3.8
Max. diff. Pressure (bar) 2.8
Max. Viscosity 10 cP
Fitting Size 3/8"
Fitting Type Pillar Super 300
Pump Head Material PTFE
Impeller Material PTFE
Sealing Ring FFPM perfluoroelastomer
Wet Volume (without drain port) ~6.5 ml
Wet Surface (without drain port) ~5 620 mm²
Max. Liquid Temperature 70°C / 158°F
Motor/Driver Coating Epoxy
Cable Lenght (mm) 5 000
Cable Jacket PVC
Ex Protection Other
Power 35 W
Voltage 24 VDC
PLC Interface 1 analog outputs 0-10 V
2 analog inputs 1 with 4-20 mA, 1 with 0-10 V
2 digital inputs 5-24 V (optocoupler)
2 digital outputs 0-24 V (drain)
Service/Control Interface 2x Fieldbus RS485 with Modbus protocol and PLC Interface
Pump Size BPS-i30
Screws Stainless Steel
Regulatory Status CE, WEEE Directive 2012/19/EU
Max. Ambient Temperature (Operating/Storage) 40°C /80°C
Dimensions (mm) See technical drawing
Weight (kg) See Subcomponents
Show more specifications
Show less specifications

System Configuration

Complementary Products