Loading...
100-91365

Pump System BPS-i100.11 (OEM Model, ATEX/IECEX)

Consists of:

Availability on request
Max. Flow (l/min) 20
Max. diff. Pressure (bar) 2
Max. Viscosity 20 cP
Max. Liquid Temperature 70°C / 158°F
Service/Control Interface RS485 with Modbus protocol and PLC Interface
This system requires complementary products! Please check section ‘complementary products’ below.

The Levitronix® Bearingless Pump System is designed for ultrapure processing of delicate fluids in microelectronic wet applications. Based on active magnetic levitation, the pump impeller is suspended and driven by the motor’s magnetic field. The wide gap ensures there is no mechanical contact between moving parts and, therefore, no wear. There are no bearings to wear out or seals to break down. The impeller and casing are both made from chemical-resistant high purity fluoropolymer resins. Fluid flow rate and pressure are precisely controlled by electronically regulating the impeller speed.

Specifications

Max. Flow (l/min) 20
Max. diff. Pressure (bar) 2
Max. Viscosity 20 cP
Fitting Size 1/2”
Fitting Type Tube
Pump Head Material PFA
Impeller Material PFA
Sealing Ring FFPM perfluoroelastomer
Wet Volume (without drain port) ~29 ml
Wet Surface (without drain port) ~16 600 mm²
Max. Liquid Temperature 70°C / 158°F
Motor/Driver Coating ETFE
Connector Type Open Wires
Cable Lenght (mm) 5 000
Cable Jacket FEP
Ex Protection ATEX/IECEx
Power 100 W
Voltage 24 VDC
PLC Interface 1 analog outputs 0-10 V
2 analog inputs 1 with 4-20 mA, 1 with 0-10 V
2 digital inputs 5-24 V (optocoupler)
2 digital outputs 0-24 V (drain)
Service/Control Interface RS485 with Modbus protocol and PLC Interface
Pump Size BPS-i100
Screws Stainless Steel+PTFE
Regulatory Status ATEX/IECEx, CE, WEEE Directive 2012/19/EU
Max. Ambient Temperature (Operating/Storage) 40°C /80°C
Dimensions (mm) See technical drawing
Weight (kg) See Subcomponents
Show more specifications
Show less specifications

System Configuration

Complementary Products