Microelectronics Pumps (BPS Series) 
Bioprocessing Pumps (Single-Use) 
Microelectronics Fans 
Control Units 
100-91112
Pump System BPS-200.52 (ATEX/IECEx, Gas Resistant)
Consists of:
Availability on request
Max. Flow (l/min)
21
Max. diff. Pressure (bar)
2.6
Max. Viscosity
20 cP
Max. Liquid Temperature
90°C / 194°F
Service/Control Interface
RS232 and PLC Interface
This system requires complementary products! Please check section ‘complementary products’ below.
The Levitronix® BPS anti-static pumps are designed for ultrapure processing of delicate solvents in microelectronic wet applications. Based on active magnetic levitation, the pump impeller is suspended and driven by the motor’s magnetic field. The wide gap ensures there is no mechanical contact between moving parts and, therefore, no wear. There are no bearings to wear out or seals to break down. The conductive wet material is available in either stainless steel or PTFE with carbon fiber additives.
Specifications
| Max. Flow (l/min) | 21 |
|---|---|
| Max. diff. Pressure (bar) | 2.6 |
| Max. Viscosity | 20 cP |
| Fitting Size | 1/2” |
| Fitting Type | Pillar Super 300 |
| Pump Head Material | Antistatic PTFE |
| Impeller Material | PFA |
| Sealing Ring | Kalrez perfluoroelastomer |
| Wet Volume (without drain port) | ~26.5 ml |
| Wet Surface (without drain port) | ~16 000 mm² |
| Max. Liquid Temperature | 90°C / 194°F |
| Motor/Driver Coating | ETFE |
| Direct Connection to Controller | Yes |
| Connector Type | 1x circular (M23, IP-67) |
| Cable Lenght (mm) | 2 000 |
| Cable Jacket | FEP |
| Ex Protection | ATEX/IECEx |
| Power | 200 W |
| Voltage | 24 - 48 VDC |
| PLC Interface | 2 analog outputs 0-5 V 4 analog inputs 2 with 4-20 mA, 2 with 0-10 V 4 digital inputs 0-24 V (optocoupler) 4 digital outputs 0-24 V (relays) |
| Service/Control Interface | RS232 and PLC Interface |
Downloads
System Configuration
