Loading...
100-91111

Pump System BPS-200.51 (ATEX/IECEx, Gas Resistant)

Consists of:

Availability on request
Max. Flow (l/min) 21
Max. diff. Pressure (bar) 2.6
Max. Viscosity 20 cP
Max. Liquid Temperature 90°C / 194°F
Service/Control Interface USB and PLC Interface
This system requires complementary products! Please check section ‘complementary products’ below.

The Levitronix® BPS anti-static pumps are designed for ultrapure processing of delicate solvents in microelectronic wet applications. Based on active magnetic levitation, the pump impeller is suspended and driven by the motor’s magnetic field. The wide gap ensures there is no mechanical contact between moving parts and, therefore, no wear. There are no bearings to wear out or seals to break down. The conductive wet material is available in either stainless steel or PTFE with carbon fiber additives.

Specifications

Max. Flow (l/min) 21
Max. diff. Pressure (bar) 2.6
Max. Viscosity 20 cP
Fitting Size 1/2”
Fitting Type Pillar Super 300
Pump Head Material Antistatic PTFE
Impeller Material PFA
Sealing Ring Kalrez perfluoroelastomer
Wet Volume (without drain port) ~26.5 ml
Wet Surface (without drain port) ~16 000 mm²
Max. Liquid Temperature 90°C / 194°F
Motor/Driver Coating ETFE
Direct Connection to Controller Yes
Connector Type 1x circular (M23, IP-67)
Cable Lenght (mm) 2 000
Cable Jacket FEP
Ex Protection ATEX/IECEx
Power 200 W
Voltage 24 - 48 VDC
PLC Interface 2 analog outputs 0-5 V
4 analog inputs 2 with 4-20 mA, 2 with 0-10 V
4 digital inputs 0-24 V (optocoupler)
4 digital outputs 0-24 V (relays)
Service/Control Interface USB and PLC Interface
Pump Size BPS-200
Screws Stainless Steel+PTFE
Regulatory Status ATEX/IECEx, CE, IECEE CB, NRTL/ETL, WEEE Directive 2012/19/EU
Max. Ambient Temperature (Operating/Storage) 40°C /80°C
Dimensions (mm) See technical drawing
Weight (kg) See Subcomponents
Show more specifications
Show less specifications

System Configuration

Complementary Products