Microelectronics Pumps (BPS Series) 
Bioprocessing Pumps (Single-Use) 
Microelectronics Fans 
Control Units 
100-91055
PuraLev® Driver System PLD-i100SU.3 (Stand-Alone)
Consists of:
Availability on request
Max. Flow (l/min)
21
Max. diff. Pressure (bar)
2
Max. Viscosity
20 cP
Max. Liquid Temperature
60°C / 140°F
Service/Control Interface
Button Control Mode
PuraLev® Single-Use pump systems are designed for demanding fluid applications in bioprocessing where extremely low shear, pulsation-free, and continuously controlled flow ensure the highest product yield. Based on the principle of magnetic levitation, the pump impeller is suspended, contact-free, inside a sealed casing and is driven by the magnetic field of the motor resulting in a continuous smooth flow.
Specifications
| Max. Flow (l/min) | 21 |
|---|---|
| Max. diff. Pressure (bar) | 2 |
| Max. Viscosity | 20 cP |
| Mounting Type | Bayonet type with locking pin |
| Sterilization Methods | Gamma radiation up to 40 kGy |
| Fitting Size | 1/2” |
| Fitting Type | Triclamp |
| Pump Head Material | Polypropylene |
| Impeller Material | Polypropylene |
| Sealing Ring | Infrared welding |
| Screws | 4 pcs M3 x 8mm (Stainless Steel) |
| Wet Volume (without drain port) | 25 ml |
| Wet Surface (without drain port) | 150 cm² |
| Max. Liquid Temperature | 60°C / 140°F |
| Motor/Driver Coating | Epoxy |
| Ex Protection | Other |
| Power | 110 W |
| Voltage | 24 VDC |
| PLC Interface | 1 analog input ("Flow", "Speed") 4-20 mA 1 digital input ("Enable") 0-24 V (optocoupler) 1 digital output ("Status") 0-24 V (relays) |
| Service/Control Interface | Button Control Mode |
| Housing/Material | Polypropylene |
Downloads
System Configuration
