100-91095
PuraLev® Driver System PLD-i100SU.2 (EasyConnect Model)
Consists of:
Availability on request
Max. Flow (l/min)
21
Max. diff. Pressure (bar)
2
Max. Viscosity
20 cP
Max. Liquid Temperature
60°C / 140°F
Service/Control Interface
2x Fieldbus RS485 with Modbus protocol and PLC Interface
PuraLev® Single-Use pump systems are designed for demanding fluid applications in bioprocessing where extremely low shear, pulsation-free, and continuously controlled flow ensure the highest product yield. Based on the principle of magnetic levitation, the pump impeller is suspended, contact-free, inside a sealed casing and is driven by the magnetic field of the motor resulting in a continuous smooth flow.
Specifications
Max. Flow (l/min) | 21 |
---|---|
Max. diff. Pressure (bar) | 2 |
Max. Viscosity | 20 cP |
Mounting Type | Bayonet type with locking pin |
Sterilization Methods | Gamma radiation up to 40 kGy |
Fitting Size | 1/2” |
Fitting Type | Triclamp |
Pump Head Material | Polypropylene |
Impeller Material | Polypropylene |
Sealing Ring | Infrared welding |
Screws | 4 pcs M3 x 8mm (Stainless Steel) |
Wet Volume (without drain port) | 24 ml |
Wet Surface (without drain port) | 150 cm² |
Max. Liquid Temperature | 60°C / 140°F |
Motor/Driver Coating | Epoxy |
Ex Protection | Other |
Power | 110 W |
Voltage | 24 VDC |
PLC Interface | 1 analog output 0 - 10 V 2 analog inputs 1 with 4-20 mA, 1 with 0-10 V 2 digital inputs 5-24 V (optocoupler) 2 digital outputs 0-24 V (drain) |
Service/Control Interface | 2x Fieldbus RS485 with Modbus protocol and PLC Interface |
Housing/Material | Polypropylene |