Microelectronics Pumps (BPS Series) 
Bioprocessing Pumps (Single-Use) 
Microelectronics Fans 
Control Units 
100-10118
Integrated Pump Driver IPD-30.3-04 (EasyConnect, High Flow)
Consists of:
Availability on request
Service/Control Interface
2x Fieldbus RS485 with Modbus protocol and PLC Interface
The controller and the motor are integrated into the driver housing, hence cabling effort is reduced. Fluid flow rate and pressure are precisely controlled by electronically regulating the impeller speed without pulsation.
The “EasyConnect” driver model with according cable accessories is designed to realize various interface configurations with minimal setup effort. Two Fieldbus connectors (IN and OUT) allow to setup arrays of multiple pumps. Therefore, serial pumping configurations can be realized. The PLC interface allows not only remote control by analog/digital signals but also connections of external sensors, hence enabling for example a precise flow or pressure control. The Fieldbus interface allows remote control.
Specifications
| Motor/Driver Coating | Epoxy |
|---|---|
| Cable Lenght (mm) | 5 000 |
| Cable Jacket | PVC |
| Ex Protection | Other |
| Power | 35 W |
| Voltage | 24 VDC |
| PLC Interface | 1 analog outputs 0-10 V 2 analog inputs 1 with 4-20 mA, 1 with 0-10 V 2 digital inputs 5-24 V (optocoupler) 2 digital outputs 0-24 V (drain) |
| Service/Control Interface | 2x Fieldbus RS485 with Modbus protocol and PLC Interface |
| IP Rating | 65 |
