Integrated Pump Driver IPD-30.12-50-01 (OEM Model, ATEX)

Availability on request
Service/Control Interface RS485 with Modbus protocol and PLC Interface
The controller and the motor are integrated into the driver housing, hence cabling effort is reduced. Fluid flow rate and pressure are precisely controlled by electronically regulating the impeller speed without pulsation.

An ATEX / IECEx certified driver (OEM model only) together with the pump head allows installation within an ATEX Zone 2 area. An Ex conform solution is needed for the motor cables to leave the ATEX area. One option is an ATEX certified cable sealing system as listed in section "complementary products".

Note: ATEX driver IPD-30.12 is certified for max. 70°C liquid temperature.


Motor/Driver Coating ETFE
Connector Type Open Wires
Cable Lenght (mm) 5 000
Cable Jacket FEP
Ex Protection ATEX/IECEx
Power 35 W
Voltage 24 VDC
PLC Interface 1 analog outputs 0-10 V
2 analog inputs 1 with 4-20 mA, 1 with 0-10 V
2 digital inputs 5-24 V (optocoupler)
2 digital outputs 0-24 V (drain)
Service/Control Interface RS485 with Modbus protocol and PLC Interface
IP Rating 65
Spare Part Type Integrated Pump Driver
Pump Size 30
Regulatory Status CE, WEEE Directive 2012/19/EU
Max. Ambient Temperature (Operating/Storage) 40°C /80°C
Dimensions (mm) See technical drawing
Weight (kg) 1
Show more specifications
Show less specifications

Complementary Products