Flow Range Sensor (l/min)
10.6 - 50 (Accuracy of +/- 1%)
Max. Viscosity (mm²/s)
0.8 - 40 mm²/s
Fitting Size
3/4”
Max. Liquid Temperature
180°C / 356°F
The LEVIFLOW® LFS inline sensor is designed for non-invasive high precision flow measurements of high purity fluids. The wet material is made from PFA and resistant against harshest chemicals. The converter with a digital signal processor (DSP) processes sensor signals. Various signals (analog output, digital input and digital output) are provided and
can be configured with a PC software. A two wire RS485 bus allows arrays of multiple flow-meters. In addition, the sensor value is shown on a 4-digit display.
Specifications
Flow Range Sensor (l/min) | 10.6 - 50 (Accuracy of +/- 1%) |
---|---|
Max. Viscosity (mm²/s) | 0.8 - 40 mm²/s |
Max. Pressure (bar) | 5 / 4.1 (at 20° / 90 °C) |
Service/Control Interface | RS485 |
Fitting Size | 3/4” |
Fitting Type | Tube |
Voltage | 24 VDC |
Wet Volume (without drain port) | 61.5 ml |
Wet Surface (without drain port) | 155.9 cm² |
Connector Type | SMB |
Cable Lenght (mm) | 500 |
Cable Jacket | FEP |
PLC Interface | 1x Analog Output: 4 – 20mA (0 – 20mA configurable) 1x Digital Input: Volume Counter Reset or Zero Adjust 2x Digital Outputs: Flow Alarm, Measurement Error, Volume Counter Pulse, Volume Counter Alarm, Flow as Frequency or Bubble Detection, Custom Output (default: normally open) 4 Digit display: (flow rate, volume counter, error codes) re-zero button Address potentiometers for RS485 address setting max. array of 99 channels |
Max. Ambient Temperature (Operating/Storage) | 0-50°C |
Max. Liquid Temperature | 180°C / 356°F |
Housing/Material | PFA |
Connector Cover | PVDF cover (male with O-Ring IP-65) |
Downloads
System Configuration
![](https://shoplevitronix.com/app/uploads/2023/02/LFC-1C.jpg)