0
100-10152

Integrated Flow Control Driver IFD-100.8-50-01 (ATEX)

Availability on request
In Favorites
Add to favorites
Service/Control Interface RS485 with Modbus protocol and PLC Interface
The pump controller, motor and flow converter are integrated into the driver housing. This reduces cabling and setup effort significantly. Fluid flow rate is precisely controlled by electronically regulating the impeller speed without pulsation.

An ATEX / IECEx certified driver (OEM model only) together with the pump head allows installation within an ATEX Zone 2 area. An Ex conform solution is needed for the motor cables to leave the ATEX area. One option is an ATEX certified cable sealing system as listed in section "complementary products".

Specifications

Motor/Driver Coating ETFE
Connector Type Open Wires
Cable Lenght (mm) 5 000
Cable Jacket FEP
Ex Protection ATEX/IECEx
Power 100 W
Voltage 24 VDC
PLC Interface 1 analog inputs 0-10 V / 4-20 mA
1 analog output 0-10 V
2 digital inputs 5-24 V (optocoupler)
2 digital outputs 0-24 V / 100 mA (open drain)
Service/Control Interface RS485 with Modbus protocol and PLC Interface
Spare Part Type Integrated Flow Control Driver
Pump Size 100
Regulatory Status CE, WEEE Directive 2012/19/EU
Max. Ambient Temperature (Operating/Storage) 40°C /80°C
IP Rating 65
Dimensions (mm) See technical drawing
Weight (kg) 2.1
Show more specifications
Show less specifications

Complementary Products

Compatible with

100-91366

Flow Control System BPS-iF100.4-04Z (ATEX/IECEx)

Flow Control System BPS-iF100.4-04Z (ATEX/IECEx)

Flow Range Sensor (l/min)
20
Max. Viscosity (mm²/s)
20 cP
Max. Pressure (bar)
2
Max. Flow (l/min)
20
Fitting Size
1/2” (Sensor: 3/8”)
Service/Control Interface
RS485 with Modbus protocol and PLC Interface
100-91367

Flow Control System BPS-iF100.4-04U (ATEX/IECEx)

Flow Control System BPS-iF100.4-04U (ATEX/IECEx)

Flow Range Sensor (l/min)
20
Max. Viscosity (mm²/s)
20 cP
Max. Pressure (bar)
2
Max. Flow (l/min)
20
Fitting Size
1/2” (Sensor: 3/8”)
Service/Control Interface
RS485 with Modbus protocol and PLC Interface
100-91368

Flow Control System BPS-iF100.4-08Z (ATEX/IECEx)

Flow Control System BPS-iF100.4-08Z (ATEX/IECEx)

Flow Range Sensor (l/min)
20
Max. Viscosity (mm²/s)
20 cP
Max. Pressure (bar)
2
Max. Flow (l/min)
20
Fitting Size
1/2” (Sensor: 3/8”)
Service/Control Interface
RS485 with Modbus protocol and PLC Interface
100-91369

Flow Control System BPS-iF100.4-08U (ATEX/IECEx)

Flow Control System BPS-iF100.4-08U (ATEX/IECEx)

Flow Range Sensor (l/min)
20
Max. Viscosity (mm²/s)
20 cP
Max. Pressure (bar)
2
Max. Flow (l/min)
20
Fitting Size
1/2” (Sensor: 3/8”)
Service/Control Interface
RS485 with Modbus protocol and PLC Interface
100-91370

Flow Control System BPS-iF100.4-20Z (ATEX/IECEx)

Flow Control System BPS-iF100.4-20Z (ATEX/IECEx)

Flow Range Sensor (l/min)
4.7 - 20 (Accuracy of +/- 1%)
Max. Viscosity (mm²/s)
20 cP
Max. Pressure (bar)
2
Max. Flow (l/min)
20
Fitting Size
1/2” (Sensor: 1/2”)
Service/Control Interface
RS485 with Modbus protocol and PLC Interface
100-91371

Flow Control System BPS-iF100.4-20U (ATEX/IECEx)

Flow Control System BPS-iF100.4-20U (ATEX/IECEx)

Flow Range Sensor (l/min)
4.7 - 20 (Accuracy of +/- 1%)
Max. Viscosity (mm²/s)
20 cP
Max. Pressure (bar)
2
Max. Flow (l/min)
20
Fitting Size
1/2” (Sensor: 1/2”)
Service/Control Interface
RS485 with Modbus protocol and PLC Interface