0
100-90923

Flow Control System BPS-iF100.2-08Z

Consists of:

Availability on request
In Favorites
Add to favorites
Flow Range Sensor (l/min) 20
Max. Viscosity (mm²/s) 20 cP
Max. Pressure (bar) 2
Max. Flow (l/min) 20
Fitting Size 1/2” (Sensor: 3/8”)
Service/Control Interface RS485 with Modbus protocol and PLC Interface
The Levitronix® BPS flow controllers are designed for ultrapure processing of delicate fluids in microelectronic wet applications. Based on active magnetic levitation, the pump impeller is suspended and driven by the magnetic field of the motor. The wide gap ensures that there is no mechanical contact between moving parts and therefore no wear. There are no bearings to wear out or seals to break down.

The impeller and casing are both made from chemical-resistant high purity fluoropolymer resins. Fluid flow rate and pressure are precisely controlled by electronically regulating the impeller speed.

Specifications

Flow Range Sensor (l/min) 20
Max. Viscosity (mm²/s) 20 cP
Max. Pressure (bar) 2
Max. Flow (l/min) 20
Fitting Size 1/2” (Sensor: 3/8”)
Fitting Type Tube
Impeller Material PFA
Sealing Ring FFPM Perfluoroelastomer (O-Ring)
Wet Volume (without drain port) 29 ml
Wet Surface (without drain port) 16 600 mm²
Max. Liquid Temperature 90 °C / 194 °F
Motor/Driver Coating ETFE
Connector Type Open Wires
Cable Lenght (mm) 5 000
Cable Jacket FEP
Ex Protection Other
Power 100 W
Voltage 24 VDC
PLC Interface 1 analog inputs 0-10 V / 4-20 mA
1 analog output 0-10 V
2 digital inputs 5-24 V (optocoupler)
2 digital outputs 0-24 V / 100 mA (open drain)
Service/Control Interface RS485 with Modbus protocol and PLC Interface
Sensor Size LFS-04, LFS-08, LFS-20
Pump Size BPS-iF100
Shape Z
Screws Stainless Steel+PTFE
Regulatory Status CE, WEEE Directive 2012/19/EU
Max. Ambient Temperature (Operating/Storage) 40°C /80°C
Show more specifications
Show less specifications

Downloads

Technical Brochure BPS-iF100

System Configuration

Complementary Products