100-10173

Integrated Flow Control Driver IFD-30.4-03 (EasyConnect, High Pressure)

Consists of:

Mounting Base Plate MBP-i30.1

Availability on request

In Favorites

Add to favorites

Service/Control Interface RS485 with Modbus protocol and PLC Interface

The pump controller, motor and flow converter are integrated into the driver housing. This reduces cabling and setup effort significantly. Fluid flow rate is precisely controlled by electronically regulating the impeller speed without pulsation.

The “EasyConnect” driver model with according cable accessories is designed to realize various interface configurations with minimal setup effort. Two Fieldbus connectors (IN and OUT) allow to setup arrays of multiple pumps. Therefore, serial pumping configurations can be realized. The PLC interface allows not only remote control by analog/digital signals but also connections of external sensors, hence enabling for example a precise flow or pressure control. The Fieldbus interface allows remote control.

Specifications

Motor/Driver Coating	Epoxy
Ex Protection	Other
Power	35 W
Voltage	24 VDC
PLC Interface	1 analog output 0-10 V 2 analog inputs 0-10 V / 4-20 mA 2 digital inputs 5-24 V (optocoupler) 2 digital outputs 0-24 V / 100 mA (open drain)
Service/Control Interface	RS485 with Modbus protocol and PLC Interface

Spare Part Type	Integrated Flow Control Driver
Pump Size	30
Regulatory Status	CE, WEEE Directive 2012/19/EU
Max. Ambient Temperature (Operating/Storage)	40°C /80°C
IP Rating	65
Dimensions (mm)	See technical drawing
Weight (kg)	0.5