100-91378
Flow Control System BPS-iF30.5-04ZSC1 (OEM, ATEX/IECEx Model)
Consists of:
- Integrated Flow Control Driver IFD-30.9-50-01 (OEM Model, ATEX)
- LeviFlow Sensor LFS-04L-Z-F1-SC1
- Pump Head LPP-30.1
Availability on request
Flow Range Sensor (l/min)
0.035 - 4 (Accuracy of +/- 1%)
Max. Flow (l/min)
7.4
Max. diff. Pressure (bar)
1.5
Max. Viscosity
10 cP
Fitting Size
3/8” (Sensor: 3/8”)
Service/Control Interface
RS485 with Modbus protocol and PLC Interface
The Levitronix® BPS flow controllers are designed for ultrapure processing of delicate fluids in microelectronic wet applications. Based on active magnetic levitation, the pump impeller is suspended and driven by the magnetic field of the motor. The wide gap ensures that there is no mechanical contact between moving parts and therefore no wear. There are no bearings to wear out or seals to break down.
The impeller and casing are both made from chemical-resistant high purity fluoropolymer resins. Fluid flow rate and pressure are precisely controlled by electronically regulating the impeller speed.
Specifications
Flow Range Sensor (l/min) | 0.035 - 4 (Accuracy of +/- 1%) |
---|---|
Max. Flow (l/min) | 7.4 |
Max. diff. Pressure (bar) | 1.5 |
Max. Viscosity | 10 cP |
Fitting Size | 3/8” (Sensor: 3/8”) |
Fitting Type | Pillar Super 300 |
Impeller Material | PTFE |
Wet Volume (without drain port) | 7.5 ml |
Wet Surface (without drain port) | 5 750 mm² |
Max. Liquid Temperature | 90 °C / 194 °F |
Motor/Driver Coating | ETFE |
Connector Type | Open Wires |
Cable Lenght (mm) | 5 000 |
Cable Jacket | FEP |
Ex Protection | ATEX/IECEx |
Power | 35 W |
Voltage | 24 VDC |
PLC Interface | 1 analog output 0-10 V 2 analog inputs 0-10 V / 4-20 mA 2 digital inputs 5-24 V (optocoupler) 2 digital outputs 0-24 V / 100 mA (open drain) |
Service/Control Interface | RS485 with Modbus protocol and PLC Interface |
Sensor Size | LFS-04L |