100-10135

Integrated Pump Driver IPD-100.4-03 (EasyConnect)

Availability on request

In Favorites

Add to favorites

Service/Control Interface 2x Fieldbus RS485 with Modbus protocol and PLC Interface

The controller and the motor are integrated into the driver housing, hence cabling effort is reduced. Fluid flow rate and pressure are precisely controlled by electronically regulating the impeller speed without pulsation.

The “EasyConnect” driver model with according cable accessories is designed to realize various interface configurations with minimal setup effort. Two Fieldbus connectors (IN and OUT) allow to setup arrays of multiple pumps. Therefore, serial pumping configurations can be realized. The PLC interface allows not only remote control by analog/digital signals but also connections of external sensors, hence enabling for example a precise flow or pressure control. The Fieldbus interface allows remote control.

Specifications

Motor/Driver Coating	Epoxy
Cable Lenght (mm)	5 000
Cable Jacket	PVC
Ex Protection	Other
Power	110 W
Voltage	24 VDC
PLC Interface	up to 2 analog inputs 0 – 10 V up to 2 analog inputs 4 – 20 mA up to 4 digital inputs 0 – 24 V (optocoupler) up to 4 digital outputs 0 – 24 V (relay)
Service/Control Interface	2x Fieldbus RS485 with Modbus protocol and PLC Interface

Spare Part Type	Integrated Pump Driver
Pump Size	100
Regulatory Status	CE, IECEE CB, NRTL/ETL, WEEE Directive 2012/19/EU
Max. Ambient Temperature (Operating/Storage)	40°C / 80°C
Dimensions (mm)	See technical drawing
Weight (kg)	1.4