0
100-91054

PuraLev® Driver System PLD-i100SU.1 (OEM Model)

Consists of:

Availability on request
In Favorites
Add to favorites
Max. Flow (l/min) 21
Max. diff. Pressure (bar) 2
Max. Viscosity 20 cP
Max. Liquid Temperature 60°C / 140°F
Service/Control Interface RS485 with Modbus protocol and PLC Interface
PuraLev® Single-Use pump systems are designed for demanding fluid applications in bioprocessing where extremely low shear, pulsation-free, and continuously controlled flow ensure the highest product yield. Based on the principle of magnetic levitation, the pump impeller is suspended, contact-free, inside a sealed casing and is driven by the magnetic field of the motor resulting in a continuous smooth flow.

Specifications

Max. Flow (l/min) 21
Max. diff. Pressure (bar) 2
Max. Viscosity 20 cP
Mounting Type Bayonet type with locking pin
Sterilization Methods Gamma radiation up to 40 kGy
Fitting Size 1/2”
Fitting Type Triclamp
Pump Head Material Polypropylene
Impeller Material Polypropylene
Sealing Ring Infrared welding
Screws 4 pcs M3 x 8mm (Stainless Steel)
Wet Volume (without drain port) 24 ml
Wet Surface (without drain port) 150 cm²
Max. Liquid Temperature 60°C / 140°F
Motor/Driver Coating Epoxy
Connector Type Open Wires
Cable Lenght (mm) 5 000
Cable Jacket PVC
Ex Protection Other
Power 110 W
Voltage 24 VDC
PLC Interface 1 analog output 0 - 10 V
2 analog inputs 1 with 4-20 mA, 1 with 0-10 V
2 digital inputs 5-24 V (optocoupler)
2 digital outputs 0-24 V (drain)
Service/Control Interface RS485 with Modbus protocol and PLC Interface
Housing/Material Polypropylene
Pump Size PLD-i100SU
Regulatory Status BSE/TSE/Animal free, CE, FDA 21 CFR, USP VI, WEEE Directive 2012/19/EU
Max. Ambient Temperature (Operating/Storage) 40°C /80°C
Dimensions (mm) See technical drawing
Weight (kg) See Subcomponents
Show more specifications
Show less specifications

Downloads

Technical Brochure PuraLev®-i100SU

System Configuration

Complementary Products