x100-91324
Pump System BPS-600.53
Consists of:
Availability on request
Max. diff. Pressure (bar)
3.2
Max. Flow (l/min)
75
Max. Liquid Temperature
90° C / 194° F
Max. Viscosity
30 cP
The Levitronix® BPS-600 is designed for ultrapure processing of delicate fluids in microelectronic wet applications. Based on active magnetic levitation, the pump impeller is suspended and driven by the magnetic field of the motor. The wide gap ensures that there is no mechanical contact between moving parts and therefore no wear. There are no bearings to wear out or seals to break down. The impeller and casing are both made from chemical-resistant high purity fluorocarbon resins. Fluid flow rate and pressure are precisely controlled by electronically regulating the impeller speed.
Pump System BPS-600.53 has an extended PLC interface: speed control via an external signal, precise closed-loop flow or pressure control when either a flow or pressure sensor is integrated into the system, connection to a computer via a RS232 interface to allow communication with Levitronix® Service Software. Hence parameterization, firmware updates and failure analysis are possible.
Specifications
Cable Jacket | FEP |
---|---|
Cable Lenght (mm) | 3000 |
Motor/Driver Coating | ETFE |
Connector Type | 2x circular (M23, IP67) |
Dimensions (mm) | See Subcomponents |
Direct Connection to Controller | No |
Fitting Size | 1" |
Fitting Type | VCR |
Ex Protection | ATEX |
Impeller Material | Stainless Steel |
Max. Ambient Temperature (Operating/Storage) | 40 C°/80 C° |
Max. diff. Pressure (bar) | 3.2 |
Max. Flow (l/min) | 75 |
Max. Liquid Temperature | 90° C / 194° F |
PLC Interface | 2 with 0-10 V up to 2 analog outputs 0 - 5 V up to 4 digital inputs 0 - 24V (optocoupler) up to 4 digital outputs 0 - 24 V (relais) up to 4 analog inputs 2 with 4-20mA |
Power | 48 VDC/600 W |
Regulatory Status | CE, IECEE CB, NRTL/ETL, WEEE Directive 2012/19/EU |
Screws | Stainless Steel |
Sealing Ring | Unfilled FFPM |
Service/Control Interface | RS232 |
Suction Port | No |
Max. Viscosity | 30 cP |
Weight (kg) | See Subcomponents |
Wet Surface (without drain port) | ~39'660 mm² |
Wet Volume (without drain port) | ~133 ml |