100-10101

Integrated Pump Driver IPD-100.6-01 (Stand-Alone Model)

Availability on request

In Favorites

Add to favorites

Service/Control Interface Button Control Mode

The controller and the motor are integrated into the driver housing, hence cabling effort is reduced. Fluid flow rate and pressure are precisely controlled by electronically regulating the impeller speed without pulsation.

The Driver has an integrated user panel and buttons to set the speed manually. The driver also contains a PLC interface for remote speed control by analog and digital signals. Various accessories are available, like a desktop power supply with relevant power cable and signal cables to connect to the PLC.

Specifications

Motor/Driver Coating	Epoxy
Cable Lenght (mm)	5 000
Cable Jacket	FEP
Ex Protection	Other
Power	100 W
Voltage	24 VDC
PLC Interface	1 analog input ("Speed") 4-20 mA 1 digital input ("Enable") 0-24 V (optocoupler) 1 digital output ("Status") 0-24 V (relays)
Service/Control Interface	Button Control Mode
IP Rating	65

Spare Part Type	Integrated Pump Driver
Pump Size	100
Regulatory Status	CE, WEEE Directive 2012/19/EU
Max. Ambient Temperature (Operating/Storage)	40°C /80°C
Dimensions (mm)	See technical drawing
Weight (kg)	1.4

Show more specifications

Show less specifications

Complementary Products

Compatible with

100-91041

Pump System BPS-i100.7 (Stand-Alone)

Max. Flow (l/min)

Max. diff. Pressure (bar)

Max. Viscosity

20 cP

Max. Liquid Temperature

70°C / 158°F

Service/Control Interface

Button Control Mode