Pump System BPS-i30.17 (Stand-Alone, High Pressure)
Consists of:
- Integrated Pump Driver IPD-30.5-03 (Stand-Alone Model, High Pressure)
- Pump Head LPP-30.3 (High Pressure)
The Levitronix® Bearingless Pump System is designed for ultrapure processing of delicate fluids in microelectronic wet applications. Based on active magnetic levitation, the pump impeller is suspended and driven by the motor’s magnetic field. The wide gap ensures there is no mechanical contact between moving parts and, therefore, no wear. There are no bearings to wear out or seals to break down. The impeller and casing are both made from chemical-resistant high purity fluoropolymer resins. Fluid flow rate and pressure are precisely controlled by electronically regulating the impeller speed.
Specifications
Max. Flow (l/min) | 3.8 |
---|---|
Max. diff. Pressure (bar) | 2.8 |
Max. Viscosity | 10 cP |
Fitting Size | 3/8" |
Fitting Type | Pillar Super 300 |
Pump Head Material | PTFE |
Impeller Material | PTFE |
Sealing Ring | FFPM perfluoroelastomer |
Wet Volume (without drain port) | ~6.5 ml |
Wet Surface (without drain port) | ~5 620 mm² |
Max. Liquid Temperature | 70°C / 158°F |
Motor/Driver Coating | Epoxy |
Cable Lenght (mm) | 5 000 |
Cable Jacket | PVC |
Ex Protection | Other |
Power | 35 W |
Voltage | 24 VDC |
PLC Interface | 1 analog input ("Speed") 4-20 mA 1 digital input ("Enable") 0-24 V (optocoupler) 1 digital output ("Status") 0-24 V (relays) |
Service/Control Interface | Button Control Mode |