0
100-91108

Pump System BPS-600.48 (ATEX/IECEx)

Consists of:

Availability on request
In Favorites
Add to favorites
Max. Flow (l/min) 75
Max. diff. Pressure (bar) 3.2
Max. Viscosity 100 cP
Max. Liquid Temperature 90°C / 194°F
Service/Control Interface RS232 and PLC Interface
This system requires complementary products! Please check section ‘complementary products’ below.

The Levitronix® BPS anti-static pumps are designed for ultrapure processing of delicate solvents in microelectronic wet applications. Based on active magnetic levitation, the pump impeller is suspended and driven by the motor’s magnetic field. The wide gap ensures there is no mechanical contact between moving parts and, therefore, no wear. There are no bearings to wear out or seals to break down. The conductive wet material is available in either stainless steel or PTFE with carbon fiber additives.

Specifications

Max. Flow (l/min) 75
Max. diff. Pressure (bar) 3.2
Max. Viscosity 100 cP
Fitting Size 1"
Fitting Type Pillar Super 300
Pump Head Material Antistatic PTFE
Impeller Material PFA
Sealing Ring FFPM perfluoroelastomer
Wet Volume (without drain port) ~136 ml
Wet Surface (without drain port) ~40 300 mm²
Max. Liquid Temperature 90°C / 194°F
Motor/Driver Coating ETFE
Direct Connection to Controller Yes
Connector Type 2x circular (M23, IP67)
Cable Lenght (mm) 3 000
Cable Jacket FEP
Ex Protection ATEX/IECEx
Power 600 W
Voltage 48 VDC
PLC Interface 2 analog outputs 0-5 V
4 analog inputs 2 with 4-20 mA, 2 with 0-10 V
4 digital inputs 0-24 V (optocoupler)
4 digital outputs 0-24 V (relays)
Service/Control Interface RS232 and PLC Interface
Housing/Material Antistatic PTFE+CFR
Pump Size BPS-600
Screws Stainless Steel
Regulatory Status CE, IECEE CB, NRTL/ETL, WEEE Directive 2012/19/EU
Max. Ambient Temperature (Operating/Storage) 40°C /80°C
Dimensions (mm) See technical drawing
Weight (kg) See Subcomponents
Show more specifications
Show less specifications

Downloads

Technical Brochure BPS-600

System Configuration

Complementary Products