Microelectronics Pumps (BPS Series) 
Bioprocessing Pumps (Single-Use) 
Microelectronics Fans 
Control Units 
100-91107
Pump System BPS-600.47 (ATEX/IECEx)
Consists of:
Availability on request
Max. Flow (l/min)
75
Max. diff. Pressure (bar)
3.2
Max. Viscosity
100 cP
Max. Liquid Temperature
90°C / 194°F
Service/Control Interface
USB and PLC Interface
This system requires complementary products! Please check section ‘complementary products’ below.
The Levitronix® BPS anti-static pumps are designed for ultrapure processing of delicate solvents in microelectronic wet applications. Based on active magnetic levitation, the pump impeller is suspended and driven by the motor’s magnetic field. The wide gap ensures there is no mechanical contact between moving parts and, therefore, no wear. There are no bearings to wear out or seals to break down. The conductive wet material is available in either stainless steel or PTFE with carbon fiber additives.
Specifications
| Max. Flow (l/min) | 75 |
|---|---|
| Max. diff. Pressure (bar) | 3.2 |
| Max. Viscosity | 100 cP |
| Fitting Size | 1" |
| Fitting Type | Pillar Super 300 |
| Pump Head Material | Antistatic PTFE |
| Impeller Material | PFA |
| Sealing Ring | FFPM perfluoroelastomer |
| Wet Volume (without drain port) | ~136 ml |
| Wet Surface (without drain port) | ~40 300 mm² |
| Max. Liquid Temperature | 90°C / 194°F |
| Motor/Driver Coating | ETFE |
| Direct Connection to Controller | Yes |
| Connector Type | 2x circular (M23, IP67) |
| Cable Lenght (mm) | 3 000 |
| Cable Jacket | FEP |
| Ex Protection | ATEX/IECEx |
| Power | 600 W |
| Voltage | 48 VDC |
| PLC Interface | 2 analog outputs 0-5 V 4 analog inputs 2 with 4-20 mA, 2 with 0-10 V 4 digital inputs 0-24 V (optocoupler) 4 digital outputs 0-24 V (relays) |
| Service/Control Interface | USB and PLC Interface |
| Housing/Material | Antistatic PTFE+CFR |
Downloads
System Configuration
