Loading...
100-91259

Pump System BPS-4000.73 (Stand-Alone)

Consists of:

Availability on request
Max. Flow (l/min) 280
Max. diff. Pressure (bar) 6.3
Max. Viscosity 30 cP
Max. Liquid Temperature 90°C / 194°F
Service/Control Interface Button Control Mode
This system requires complementary products! Please check section ‘complementary products’ below.

The Levitronix® Bearingless Pump System is designed for ultrapure processing of delicate fluids in microelectronic wet applications. Based on active magnetic levitation, the pump impeller is suspended and driven by the motor’s magnetic field. The wide gap ensures there is no mechanical contact between moving parts and, therefore, no wear. There are no bearings to wear out or seals to break down. The impeller and casing are both made from chemical-resistant high purity fluoropolymer resins. Fluid flow rate and pressure are precisely controlled by electronically regulating the impeller speed.

Specifications

Max. Flow (l/min) 280
Max. diff. Pressure (bar) 6.3
Max. Viscosity 30 cP
Fitting Size 1.5” / 1” (inlet/outlet)
Fitting Type Pillar Super 300
Pump Head Material PTFE
Impeller Material PFA
Sealing Ring Kalrez perfluoroelastomer
Wet Volume (without drain port) ~ 517 ml
Wet Surface (without drain port) ~ 119 000 mm²
Max. Liquid Temperature 90°C / 194°F
Motor/Driver Coating ETFE
Direct Connection to Controller Yes
Connector Type 2x circular (AMP types)
Cable Lenght (mm) 3 000
Cable Jacket FEP
Ex Protection Other
Power 2 000 W
Voltage 200-240 VAC
PLC Interface 1 analog input ("Speed") 4-20 mA
1 digital input ("Enable") 0-24 V (optocoupler)
1 digital output ("Status") 0-24 V (relays)
Service/Control Interface Button Control Mode
Pump Size BPS-4000
Screws Stainless Steel
Regulatory Status CE, IECEE CB, NRTL/ETL, WEEE Directive 2012/19/EU
Max. Ambient Temperature (Operating/Storage) 40°C /80°C
Dimensions (mm) See technical drawing
Weight (kg) See Subcomponents
Show more specifications
Show less specifications

System Configuration

Complementary Products