Microelectronics Pumps (BPS Series) 
Bioprocessing Pumps (Single-Use) 
Microelectronics Fans 
Control Units 
100-91103
Pump System BPS-2000.30 (Stand-Alone, ATEX/IECEx, High Flow)
Consists of:
Availability on request
Max. Flow (l/min)
140
Max. diff. Pressure (bar)
4.2
Max. Viscosity
80 cP
Max. Liquid Temperature
90°C / 194°F
Service/Control Interface
Button Control Mode
This system requires complementary products! Please check section ‘complementary products’ below.
The Levitronix® BPS anti-static pumps are designed for ultrapure processing of delicate solvents in microelectronic wet applications. Based on active magnetic levitation, the pump impeller is suspended and driven by the motor’s magnetic field. The wide gap ensures there is no mechanical contact between moving parts and, therefore, no wear. There are no bearings to wear out or seals to break down. The conductive wet material is available in either stainless steel or PTFE with carbon fiber additives.
Specifications
| Max. Flow (l/min) | 140 |
|---|---|
| Max. diff. Pressure (bar) | 4.2 |
| Max. Viscosity | 80 cP |
| Fitting Size | 1" |
| Fitting Type | Pillar Super 300 |
| Pump Head Material | Antistatic PTFE |
| Impeller Material | PFA |
| Sealing Ring | Kalrez perfluoroelastomer |
| Wet Volume (without drain port) | ~ 277 ml |
| Wet Surface (without drain port) | ~ 65 150 mm² |
| Max. Liquid Temperature | 90°C / 194°F |
| Motor/Driver Coating | ETFE |
| Direct Connection to Controller | Yes |
| Connector Type | 2x circular (M23, IP67) |
| Cable Lenght (mm) | 3 000 |
| Cable Jacket | FEP |
| Ex Protection | ATEX/IECEx |
| Power | 2 000 W |
| Voltage | 200-240 VAC |
| PLC Interface | 1 analog input ("Speed") 4-20 mA 1 digital input ("Enable") 0-24 V (optocoupler) 1 digital output ("Status") 0-24 V (relays) |
| Service/Control Interface | Button Control Mode |
| Housing/Material | PTFE+CFR |
Downloads
System Configuration
