Pump System BPS-200.16 (ATEX/IECEx)
Consists of:
The Levitronix® Bearingless Pump System is designed for ultrapure processing of delicate fluids in microelectronic wet applications. Based on active magnetic levitation, the pump impeller is suspended and driven by the motor’s magnetic field. The wide gap ensures there is no mechanical contact between moving parts and, therefore, no wear. There are no bearings to wear out or seals to break down. The impeller and casing are both made from chemical-resistant high purity fluoropolymer resins. Fluid flow rate and pressure are precisely controlled by electronically regulating the impeller speed.
Specifications
Max. Flow (l/min) | 21 |
---|---|
Max. diff. Pressure (bar) | 2.6 |
Max. Viscosity | 50 cP |
Fitting Size | 1/2” |
Fitting Type | Flaretek |
Pump Head Material | PTFE |
Impeller Material | PFA |
Sealing Ring | Kalrez perfluoroelastomer |
Wet Volume (without drain port) | ~25 ml |
Wet Surface (without drain port) | ~15 300 mm² |
Max. Liquid Temperature | 90°C / 194°F |
Motor/Driver Coating | ETFE |
Direct Connection to Controller | Yes |
Connector Type | 1x circular (M23, IP-67) |
Cable Lenght (mm) | 2 000 |
Cable Jacket | FEP |
Ex Protection | ATEX/IECEx |
Power | 200 W |
Voltage | 24 - 48 VDC |
PLC Interface | 2 analog outputs 0-5 V 4 analog inputs 2 with 4-20 mA, 2 with 0-10 V 4 digital inputs 0-24 V (optocoupler) 4 digital outputs 0-24 V (relays) |
Service/Control Interface | RS232 and PLC Interface |
Downloads
System Configuration
![](https://shoplevitronix.com/app/uploads/2023/02/BPS-200-ATEX.jpg)