100-10169

Integrated Pump Driver IPD-30.12-50-03 (OEM Model, ATEX, High Pressure)

Availability on request

In Favorites

Add to favorites

Service/Control Interface RS485 with Modbus protocol and PLC Interface

The controller and the motor are integrated into the driver housing, hence cabling effort is reduced. Fluid flow rate and pressure are precisely controlled by electronically regulating the impeller speed without pulsation.

An ATEX / IECEx certified driver (OEM model only) together with the pump head allows installation within an ATEX Zone 2 area. An Ex conform solution is needed for the motor cables to leave the ATEX area. One option is an ATEX certified cable sealing system as listed in section "complementary products".

Note: ATEX driver IPD-30.12 is certified for max. 70°C liquid temperature.

Specifications

Motor/Driver Coating	ETFE
Connector Type	Open Wires
Cable Lenght (mm)	5 000
Cable Jacket	FEP
Ex Protection	ATEX/IECEx
Power	35 W
Voltage	24 VDC
PLC Interface	1 analog outputs 0-10 V 2 analog inputs 1 with 4-20 mA, 1 with 0-10 V 2 digital inputs 5-24 V (optocoupler) 2 digital outputs 0-24 V (drain)
Service/Control Interface	RS485 with Modbus protocol and PLC Interface
IP Rating	65

Spare Part Type	Integrated Pump Driver
Pump Size	30
Regulatory Status	CE, WEEE Directive 2012/19/EU
Max. Ambient Temperature (Operating/Storage)	40°C /80°C
Dimensions (mm)	See technical drawing
Weight (kg)	1