Microelectronics Pumps (BPS Series) 
Bioprocessing Pumps (Single-Use) 
Microelectronics Fans 
Control Units 
100-91113
LFSC-05D-001 + LFC-1C-PC
Consists of:
Availability on request
Flow Range Sensor (l/min)
0 - 1 (Accuracy of +/- 5 %)
Max. Viscosity (mm²/s)
0.7 – 10 mm² /s
Service/Control Interface
RS485 with Modbus protocol
Tubing Size (ID x OD)
1/8" x 1/4"
Max. Liquid Temperature
10 - 60°C
The standard configuration of the LEVIFLOW® clamp-on flowmeters consists of a flow sensor and a converter with a digital signal processor (DSP) for processing the sensor signals. Various signals (analog output, digital input/output) are provided and can be configured with a PC software. A two wire RS485 bus allows arrays of multiple flowmeters. In addition, the
sensor value is shown on a 4-digit display. For debugging, data collection and configuration with a PC the Levitronix® Service Software is available at Levitronix® together with a USB to RS485 adaptor.
Extension and interconnect cables to be ordered as separate article with specified length. Default activated calibration set is Silicone at 37°C water temperature.
Specifications
| Flow Range Sensor (l/min) | 0 - 1 (Accuracy of +/- 5 %) |
|---|---|
| Max. Pressure (bar) | 6.5 |
| Max. Viscosity (mm²/s) | 0.7 – 10 mm² /s |
| Service/Control Interface | RS485 with Modbus protocol |
| Tubing Size (ID x OD) | 1/8" x 1/4" |
| Fitting Type | Tube |
| Voltage | 24 VDC |
| PLC Interface | 1x Analog Output: 4 – 20mA (0 – 20mA configurable) 1x Digital Input 2x Digital Outputs 4 Digit display max. array of 99 channels |
| Max. Ambient Temperature (Operating/Storage) | 0 - 40°C |
| Max. Liquid Temperature | 10 - 60°C |
| Connector Types | Circular Hirose (IP-67), lock-release mounting |
Downloads
System Configuration
