0
100-91026

PuraLev® Driver System PLD-i30SU.3 (Stand-Alone)

Consists of:

Availability on request
In Favorites
Add to favorites
Max. Flow (l/min) 7.7
Max. diff. Pressure (bar) 1
Max. Viscosity 40 cP
Max. Liquid Temperature 60°C / 140°F
Service/Control Interface Button Control Mode
PuraLev® Single-Use pump systems are designed for demanding fluid applications in bioprocessing where extremely low shear, pulsation-free, and continuously controlled flow ensure the highest product yield. Based on the principle of magnetic levitation, the pump impeller is suspended, contact-free, inside a sealed casing and is driven by the magnetic field of the motor resulting in a continuous smooth flow.

Specifications

Max. Flow (l/min) 7.7
Max. diff. Pressure (bar) 1
Max. Viscosity 40 cP
Mounting Type Bayonet type with locking pin
Sterilization Methods Gamma radiation up to 40 kGy
Fitting Size 3/8"
Fitting Type Barb
Pump Head Material Polypropylene
Impeller Material Polypropylene
Sealing Ring Infrared welding
Screws 4 pcs M3 x 6 mm (Stainless Steel)
Wet Volume (without drain port) 7.7 ml
Wet Surface (without drain port) 55.9 cm²
Max. Liquid Temperature 60°C / 140°F
Motor/Driver Coating Epoxy
Ex Protection Other
Power 35 W
Voltage 24 VDC
PLC Interface 1 analog input ("Flow", "Speed") 4-20 mA
1 digital input ("Enable") 0-24 V (optocoupler)
1 digital output ("Status") 0-24 V (relays)
Service/Control Interface Button Control Mode
Housing/Material Polypropylene
Pump Size PLD-i30SU
Regulatory Status BSE/TSE/Animal free, CE, FDA 21 CFR, USP VI, WEEE Directive 2012/19/EU
Max. Ambient Temperature (Operating/Storage) 40°C /80°C
Dimensions (mm) See technical drawing
Weight (kg) See Subcomponents
Show more specifications
Show less specifications

Downloads

Technical Brochure PuraLev®-i30SU

System Configuration

Complementary Products