0
100-90729

PuraLev® Driver System PLD-2000SU.4 (ATEX/IECEx, Stand-Alone)

Consists of:

Availability on request
In Favorites
Add to favorites
Max. Flow (l/min) 140
Max. diff. Pressure (bar) 4.3
Max. Viscosity 50 cP
Max. Liquid Temperature 60°C / 140°F
Service/Control Interface Button Control Mode
PuraLev® Single-Use pump systems are designed for demanding fluid applications in bioprocessing where extremely low shear, pulsation-free, and continuously controlled flow ensure the highest product yield. Based on the principle of magnetic levitation, the pump impeller is suspended, contact-free, inside a sealed casing and is driven by the magnetic field of the motor resulting in a continuous smooth flow.

Specifications

Max. Flow (l/min) 140
Max. diff. Pressure (bar) 4.3
Max. Viscosity 50 cP
Mounting Type Bayonet type with locking pin
Sterilization Methods Gamma radiation up to 40 kGy
Fitting Size 1"
Fitting Type Triclamp
Pump Head Material Polypropylene
Impeller Material Polypropylene
Screws 4 x M8
Wet Volume (without drain port) 270 ml
Wet Surface (without drain port) 630 cm²
Max. Liquid Temperature 60°C / 140°F
Motor/Driver Coating ETFE
Direct Connection to Controller Yes
Connector Type 2x circular (M23, IP-67)
Cable Lenght (mm) 3 000
Cable Jacket FEP
Ex Protection ATEX/IECEx
Power 2 000 W
Voltage 240 V AC
PLC Interface 1 analog input ("Speed") 4-20 mA
1 digital input ("Enable") 0-24 V (optocoupler)
1 digital output ("Status") 0-24 V (relays)
Service/Control Interface Button Control Mode
Housing/Material Polypropylene
Pump Size PLD-2000SU
Regulatory Status ATEX/IECEx, CE, IECEE CB, WEEE Directive 2012/19/EU
Max. Ambient Temperature (Operating/Storage) 40°C /80°C
Dimensions (mm) See technical drawing
Weight (kg) See Subcomponents
Show more specifications
Show less specifications

Downloads

Technical Brochure PuraLev®-2000SU

System Configuration

Complementary Products