Loading...
100-91113

LFSC-05D-001 + LFC-1C-PC

Consists of:

Availability on request
Flow Range Sensor (l/min) 0 - 1 (Accuracy of +/- 5 %)
Max. Viscosity (mm²/s) 0.7 – 10 mm² /s
Service/Control Interface RS485 with Modbus protocol
Tubing Size (ID x OD) 1/8" x 1/4"
Max. Liquid Temperature 10 - 60°C
The standard configuration of the LEVIFLOW® clamp-on flowmeters consists of a flow sensor and a converter with a digital signal processor (DSP) for processing the sensor signals. Various signals (analog output, digital input/output) are provided and can be configured with a PC software. A two wire RS485 bus allows arrays of multiple flowmeters. In addition, the sensor value is shown on a 4-digit display. For debugging, data collection and configuration with a PC the Levitronix® Service Software is available at Levitronix® together with a USB to RS485 adaptor.

Extension and interconnect cables to be ordered as separate article with specified length. Default activated calibration set is Silicone at 37°C water temperature.

Specifications

Flow Range Sensor (l/min) 0 - 1 (Accuracy of +/- 5 %)
Max. Pressure (bar) 6.5
Max. Viscosity (mm²/s) 0.7 – 10 mm² /s
Service/Control Interface RS485 with Modbus protocol
Tubing Size (ID x OD) 1/8" x 1/4"
Fitting Type Tube
Voltage 24 VDC
PLC Interface 1x Analog Output: 4 – 20mA (0 – 20mA configurable)
1x Digital Input
2x Digital Outputs
4 Digit display
max. array of 99 channels
Max. Ambient Temperature (Operating/Storage) 0 - 40°C
Max. Liquid Temperature 10 - 60°C
Connector Types Circular Hirose (IP-67), lock-release mounting
Regulatory Status CE, WEEE Directive
Show more specifications
Show less specifications

System Configuration

Complementary Products