Microelectronics Pumps (BPS Series) 
Bioprocessing Pumps (Single-Use) 
Microelectronics Fans 
Control Units 
100-10131
Integrated Pump Driver IFD-30.4-02 (EasyConnect Model)
Consists of:
Availability on request
Max. Liquid Temperature
2 - 60 °C
Service/Control Interface
RS485 with Modbus protocol and PLC Interface
The pump controller, motor and flow converter are integrated into the driver housing. This reduces cabling and setup effort significantly. Fluid flow rate is precisely controlled by electronically regulating the impeller speed without pulsation.
The “EasyConnect” driver model with according cable accessories is designed to realize various interface configurations with minimal setup effort. Two Fieldbus connectors (IN and OUT) allow to setup arrays of multiple pumps. Therefore, serial pumping configurations can be realized. The PLC interface allows not only remote control by analog/digital signals but also connections of external sensors, hence enabling for example a precise flow or pressure control. The Fieldbus interface allows remote control.
Specifications
| Max. Liquid Temperature | 2 - 60 °C |
|---|---|
| Motor/Driver Coating | Epoxy |
| Power | 35 W |
| Voltage | 24 VDC |
| PLC Interface | 1 analog output 0 - 10 V 2 analog inputs 1 with 4-20 mA, 1 with 0-10 V 2 digital inputs 5-24 V (optocoupler) 2 digital outputs 0-24 V (drain) |
| Max. Ambient Temperature (Operating/Storage) | 0 - 40 °C |
| Service/Control Interface | RS485 with Modbus protocol and PLC Interface |
