Microelectronics Pumps (BPS Series) 
Bioprocessing Pumps (Single-Use) 
Microelectronics Fans 
Control Units 
100-10138
Integrated Pump Driver IFD-100.4-02 (OEM Model)
Availability on request
Service/Control Interface
RS485 with Modbus protocol and PLC Interface
The pump controller, motor and flow converter are integrated into the driver housing. This reduces cabling and setup effort significantly. Fluid flow rate is precisely controlled by electronically regulating the impeller speed without pulsation.
The Driver has an integrated user panel and buttons to set the speed manually. The driver also contains a PLC interface for remote speed control by analog and digital signals. Various accessories are available, like a desktop power supply with relevant power cable and signal cables to connect to the PLC.
Specifications
| Motor/Driver Coating | Epoxy |
|---|---|
| Cable Lenght (mm) | 5 000 |
| Cable Jacket | PVC |
| Power | 100 W |
| Voltage | 24 VDC |
| PLC Interface | 1 analog output 0 - 10 V 2 analog inputs 1 with 4-20 mA, 1 with 0-10 V 2 digital inputs 5-24 V (optocoupler) 2 digital outputs 0-24 V (drain) |
| Max. Ambient Temperature (Operating/Storage) | 40°C /80°C |
| Service/Control Interface | RS485 with Modbus protocol and PLC Interface |
| Connector Types | Open wires |
