0
100-90652

PuraLev® Driver System PLD-200SU.6 (ATEX/IECEx)

Consists of:

Availability on request
In Favorites
Add to favorites
Max. Flow (l/min) 21
Max. diff. Pressure (bar) 2
Max. Viscosity 20 cP
Max. Liquid Temperature 60°C / 140°F
Service/Control Interface RS232 and PLC Interface
PuraLev® Single-Use pump systems are designed for demanding fluid applications in bioprocessing where extremely low shear, pulsation-free, and continuously controlled flow ensure the highest product yield. Based on the principle of magnetic levitation, the pump impeller is suspended, contact-free, inside a sealed casing and is driven by the magnetic field of the motor resulting in a continuous smooth flow.

Specifications

Max. Flow (l/min) 21
Max. diff. Pressure (bar) 2
Max. Viscosity 20 cP
Mounting Type Bayonet type with locking pin
Sterilization Methods Gamma radiation up to 40 kGy
Fitting Size 1/2”
Fitting Type Triclamp
Pump Head Material Polypropylene
Impeller Material Polypropylene
Sealing Ring Infrared welding
Screws 4 pcs M3 x 8mm (Stainless Steel)
Wet Volume (without drain port) 24 ml
Max. Liquid Temperature 60°C / 140°F
Motor/Driver Coating ETFE
Direct Connection to Controller Yes
Connector Type 1x circular (M23, IP-67)
Cable Lenght (mm) 2 000
Cable Jacket FEP
Ex Protection ATEX/IECEx
Power 200 W
Voltage 24 VDC
PLC Interface up to 2 analog outputs 0-5 V
up to 4 analog inputs 2 with 4-20 mA, 2 with 0-10 V
up to 4 digital inputs 0-24 V (optocoupler)
up to 4 digital outputs 0-24 V (relays)
Service/Control Interface RS232 and PLC Interface
Housing/Material Polypropylene
Pump Size PLD-200SU
Regulatory Status ATEX/IECEx, CE, IECEE CB, WEEE Directive 2012/19/EU
Max. Ambient Temperature (Operating/Storage) 40°C /80°C
Dimensions (mm) See technical drawing
Weight (kg) See Subcomponents
Show more specifications
Show less specifications

Downloads

Technical Brochure PuraLev®-200SU

System Configuration

Complementary Products