100-90650
PuraLev® Driver System PLD-200SU.4 (ATEX/IECEx, Stand-Alone)
Consists of:
Availability on request
Max. Flow (l/min)
21
Max. diff. Pressure (bar)
2
Max. Viscosity
20 cP
Max. Liquid Temperature
60°C / 140°F
Service/Control Interface
Button Control Mode
PuraLev® Single-Use pump systems are designed for demanding fluid applications in bioprocessing where extremely low shear, pulsation-free, and continuously controlled flow ensure the highest product yield. Based on the principle of magnetic levitation, the pump impeller is suspended, contact-free, inside a sealed casing and is driven by the magnetic field of the motor resulting in a continuous smooth flow.
Specifications
Max. Flow (l/min) | 21 |
---|---|
Max. diff. Pressure (bar) | 2 |
Max. Viscosity | 20 cP |
Mounting Type | Bayonet type with locking pin |
Sterilization Methods | Gamma radiation up to 40 kGy |
Fitting Size | 1/2” |
Fitting Type | Triclamp |
Pump Head Material | Polypropylene |
Impeller Material | Polypropylene |
Sealing Ring | Infrared welding |
Screws | 4 pcs M3 x 8mm (Stainless Steel) |
Wet Volume (without drain port) | 24 ml |
Max. Liquid Temperature | 60°C / 140°F |
Motor/Driver Coating | ETFE |
Direct Connection to Controller | Yes |
Connector Type | 1x circular (M23, IP-67) |
Cable Lenght (mm) | 2 000 |
Cable Jacket | FEP |
Ex Protection | ATEX/IECEx |
Power | 200 W |
Voltage | 24 VDC |
PLC Interface | 1 analog input ("Speed") 4-20 mA 1 digital input ("Enable") 0-24 V (optocoupler) 1 digital output ("Status") 0-24 V (relays) |
Service/Control Interface | Button Control Mode |
Housing/Material | Polypropylene |
Downloads
System Configuration
![](https://shoplevitronix.com/app/uploads/2023/02/PuraLev-200SU-ATEX.jpg)