Microelectronics Pumps (BPS Series) 
Bioprocessing Pumps (Single-Use) 
Microelectronics Fans 
Control Units 
100-91512
Pump System PuraLev®-i100MU.8 (ATEX/IECEx, OEM Model)
Consists of:
- Integrated Pump Driver IPD-100.10-50-03 (ATEX, OEM Model)
- Multi-Use Pump Head LPP-200.17 (Drain Port)
Availability on request
Max. Flow (l/min)
17.4
Max. diff. Pressure (bar)
2.4
Max. Viscosity
20 cP
Drain Port
Yes (Fittings: Triclamp ½“)
Max. Liquid Temperature
70°C / 158°F
Service/Control Interface
RS485 with Modbus protocol and PLC Interface
Levitronix® PuraLev® multi-use pump systems are designed for demanding fluid applications where ultra-low shear, pulsation-free, and continuously controlled flow eliminate any formation of particles resulting in a highly reliable solution. Based on the principle of magnetic levitation, the pump impeller is suspended, contact-free, inside a sealed casing and is driven by the magnetic field of the motor resulting in a continuous and smooth flow. It combines all the advantages of a centrifugal pump but avoids problems related to the breakdown of mechanical bearings and seals found in competitive pump systems.
Specifications
| Max. Flow (l/min) | 17.4 |
|---|---|
| Max. diff. Pressure (bar) | 2.4 |
| Max. Viscosity | 20 cP |
| Fitting Size | 1/2” |
| Fitting Type | Triclamp |
| Pump Head Material | PVDF |
| Impeller Material | PFA |
| Sealing Ring | EPDM |
| Drain Port | Yes (Fittings: Triclamp ½“) |
| Sterilization Methods | Autoclaving, CIP, SIP |
| Wet Volume (without drain port) | 26 ml (without drain port) |
| Wet Surface (without drain port) | 158 cm² (without drain port) |
| Max. Liquid Temperature | 70°C / 158°F |
| Motor/Driver Coating | Epoxy |
| Connector Type | Open Wires |
| Cable Lenght (mm) | 5 000 |
| Cable Jacket | PVC |
| Ex Protection | ATEX/IECEx |
| Power | 110 W |
| Voltage | 24 VDC |
| PLC Interface | up to 2 analog inputs 0 – 10 V up to 2 analog inputs 4 – 20 mA up to 4 digital inputs 0 – 24 V (optocoupler) up to 4 digital outputs 0 – 24 V (relay) |
| Service/Control Interface | RS485 with Modbus protocol and PLC Interface |
Downloads
System Configuration
