100-90871
Pump System PuraLev®-200MU.32 (ATEX/IECEx, Stand-Alone Model)
Consists of:
- Motor BSM-1.6 (ATEX)
- Controller LPC-200.1-02 (Stand-Alone Model)
- Multi-Use Pump Head LPP-200.17 (Drain Port)
Availability on request
Max. Flow (l/min)
21
Max. diff. Pressure (bar)
2.4
Max. Viscosity
20 cP
Drain Port
Yes (Fittings: Triclamp ½“)
Max. Liquid Temperature
90°C / 194°F
Service/Control Interface
Button Control Mode
Levitronix® PuraLev® multi-use pump systems are designed for demanding fluid applications where ultra-low shear, pulsation-free, and continuously controlled flow eliminate any formation of particles resulting in a highly reliable solution. Based on the principle of magnetic levitation, the pump impeller is suspended, contact-free, inside a sealed casing and is driven by the magnetic field of the motor resulting in a continuous and smooth flow. It combines all the advantages of a centrifugal pump but avoids problems related to the breakdown of mechanical bearings and seals found in competitive pump systems.
Specifications
Max. Flow (l/min) | 21 |
---|---|
Max. diff. Pressure (bar) | 2.4 |
Max. Viscosity | 20 cP |
Fitting Size | 1/2” |
Fitting Type | Triclamp |
Pump Head Material | PVDF |
Impeller Material | PFA |
Sealing Ring | EPDM |
Drain Port | Yes (Fittings: Triclamp ½“) |
Sterilization Methods | Autoclaving, CIP, SIP |
Wet Volume (without drain port) | 25 ml (without drain port) |
Wet Surface (without drain port) | 158 cm² (without drain port) |
Max. Liquid Temperature | 90°C / 194°F |
Motor/Driver Coating | ETFE |
Direct Connection to Controller | Yes |
Connector Type | 1x circular (M23, IP-67) |
Cable Lenght (mm) | 2 000 |
Cable Jacket | FEP |
Ex Protection | ATEX/IECEx |
Power | 200 W |
Voltage | 24-48 VDC |
PLC Interface | 1x analog input (“Speed”) 4 - 20 mA 1x digital input (“Enable”) 0 - 24 V (optocoupler) 1x digital output (“Status”) 0 - 24 V (relais) |
Service/Control Interface | Button Control Mode |
IP Rating | 67 |