Microelectronics Pumps (BPS Series) 
Bioprocessing Pumps (Single-Use) 
Microelectronics Fans 
Control Units 
100-10071
Integrated Pump Driver IPD-100.2-50-01 (OEM Model)
Availability on request
Service/Control Interface
RS485 with Modbus protocol and PLC Interface
The controller and the motor are integrated into the driver housing, hence cabling effort is reduced. Fluid flow rate and pressure are precisely controlled by electronically regulating the impeller speed without pulsation.
The “OEM” models are designed for a compact integration with one integrated driver cable containing all available interface signals. Basically, all configurations of the “EasyConnect” models are possible allowing the users with integration capabilities to adapt the cable to their needs.
Specifications
| Motor/Driver Coating | ETFE |
|---|---|
| Connector Type | Open Wires |
| Cable Lenght (mm) | 5 000 |
| Cable Jacket | FEP |
| Ex Protection | Other |
| Power | 100 W |
| Voltage | 24 VDC |
| PLC Interface | 1 analog outputs 0-10 V 2 analog inputs 1 with 4-20 mA, 1 with 0-10 V 2 digital inputs 5-24 V (optocoupler) 2 digital outputs 0-24 V (drain) |
| Service/Control Interface | RS485 with Modbus protocol and PLC Interface |
| IP Rating | 65 |
