100-90069

Integrated Pump Driver IPD-100.1-50-01 (OEM Model)

Availability on request

In Favorites

Add to favorites

Service/Control Interface RS485 with Modbus protocol and PLC Interface

The controller and the motor are integrated into the driver housing, hence cabling effort is reduced. Fluid flow rate and pressure are precisely controlled by electronically regulating the impeller speed without pulsation.

The “OEM” models are designed for a compact integration with one integrated driver cable containing all available interface signals. Basically, all configurations of the “EasyConnect” models are possible allowing the users with integration capabilities to adapt the cable to their needs.

Specifications

Motor/Driver Coating	Epoxy
Connector Type	Open Wires
Cable Lenght (mm)	5 000
Cable Jacket	PVC
Ex Protection	Other
Power	100 W
Voltage	24 VDC
PLC Interface	1 analog outputs 0-10 V 2 analog inputs 1 with 4-20 mA, 1 with 0-10 V 2 digital inputs 5-24 V (optocoupler) 2 digital outputs 0-24 V (drain)
Service/Control Interface	RS485 with Modbus protocol and PLC Interface
IP Rating	65

Spare Part Type	Integrated Pump Driver
Pump Size	100
Regulatory Status	CE, WEEE Directive 2012/19/EU
Max. Ambient Temperature (Operating/Storage)	40°C /80°C
Dimensions (mm)	See technical drawing
Weight (kg)	2.1

Show more specifications

Show less specifications

Complementary Products

Compatible with

100-90719

Pump System BPS-i100.1 (OEM Model)

Max. Flow (l/min)

Max. diff. Pressure (bar)

Max. Viscosity

20 cP

Max. Liquid Temperature

70°C / 158°F

Service/Control Interface

RS485 with Modbus protocol and PLC Interface